<\/span><\/h2>\n\n\n\nAfter a while, the hose can become blocked and clogged with debris and hair, which can affect how much suction power you are getting. <\/p>\n\n\n\n
Disconnect the hose from your Dyson, which can be done via a little red button that is located on the wand.<\/p>\n\n\n\n
You need to visually check the hose to see if there is any debris or build-up that is blocking the tube. <\/p>\n\n\n\n
If you can see some, use a broom or mop handle to brush it through. Don\u2019t vacuum this back up as it will cause another blockage just dispose of it in the bin. <\/p>\n\n\n\n
The hose is only thin material which is why you want to avoid using any type of harsh chemicals as it can cause irreversible damage. <\/p>\n\n\n\n
However, you can use a vinegar cleaning solution which will help to kill bacteria and germs sitting inside the pipes.<\/p>\n\n\n\n
You can fill up your sink or basin with clean, warm water, then go ahead and add one full cup of white distilled vinegar. <\/p>\n\n\n\n
Swirl it around and then submerge the hose into the mixture. You can let the hose sit for a few minutes then you can use your tap to flush the mixture and debris out. <\/p>\n\n\n\n
You can do this outside and use your hose if your sink is not big enough.<\/p>\n\n\n\n
It can also be done by holding your Dyson hose in a U shape. Make sure the hose is completely dry before you go ahead and reconnect your vacuum. <\/p>\n\n\n\n
It is good to let the hose dry overnight to ensure it is fully dry. Don\u2019t dry in the sun as the sun’s warmth and the plastic together will create moisture that will remain in the hose.<\/p>\n\n\n\n
<\/span>Cleaning The Exterior<\/span><\/h2>\n\n\n\nNow that you have fully cleaned out the inside of your vacuum, you can’t stop there. You need to clean the outside of your Dyson to; a damp microfiber cloth works well for this job. <\/p>\n\n\n\n
They squeeze out well, so they won’t get oversaturated. To give an overall good clean, sanitize the soleplate and wheels of the vacuum.<\/p>\n\n\n\n
Your wheels are rolling around on the floors each time you vacuum and are already dirty, then you vacuum again, tracking that dirty back onto your floors. <\/p>\n\n\n\n
You can use diluted vinegar as it works well to disinfectant surfaces, and it won’t harm the soleplate or the wheels.<\/p>\n\n\n\n
Now You Can Start To Vacuum<\/strong><\/p>\n\n\n\nCleaning your Dyson is an important task that you need to complete often to keep it in working condition and doing its job properly. <\/p>\n\n\n\n
Your Dyson will last you longer if you look after it. Make sure that your Dyson is always unplugged and fully dried before plugging it back in just to be safe. <\/p>\n\n\n\n
Always start with the dust canister, then dust out the filters, then go ahead and clean your filter. You will be surprised how well the vacuum cleans your floors once it has had a good clean itself.<\/p>\n\n\n\n
Giving your vacuum a good clean can give it a new lease on life. It doesn\u2019t take much, and it can save you from having to buy a new vacuum as the Dyson brand vacuums don\u2019t come cheap. <\/p>\n\n\n\n
It is a good idea to keep your floor cleaned frequently as the more build-up your vacuum is picking up, the more it might end up clogged and struggle with the heavy loads.<\/p>\n\n\n\n
<\/span>Frequently Asked Questions About How To Clean Dyson V6<\/span><\/h2>\n\n\n\n<\/span>How Often Should I Deep Clean My Dyson?<\/span><\/h3>\n\n\n\nIt is a good idea to deep clean your Dyson every few months. You need to empty the canister after each use. This will ensure that your carpet is being cleaned each time properly.<\/p>\n\n\n\n
<\/span>Should I Replace My Filter Pads for my Dyson?<\/span><\/h3>\n\n\n\nFilter pads for a Dyson vacuum cleaner can be cleaned a few times, but after that, it is best to buy a replacement as washing too much will start to disintegrate the fibers and make them less effective.<\/p>\n\n\n